Hello..long time no see… back to computer science *close face with hands*, generally I’m electronics students but this is my hobby, and my occasion is embedded system engineer so the my major and the hobby meets. its nice..

the computer is a part of electronics, it has capacitor, resistor and inductor.. the electronics began with RLC and growth became a computer, in this part I’ll tell you about the basic of base system we use in computer science and electronics.

It’s generally easiest to understand the concept of different bases by looking at base 10. When we have a number in base 10, each digit can be referred to as the ones digit, tens digit, the hundreds digit, the thousands digit, or so forth. For instance, in the number 432, 4 is the hundreds digit, 3 is the tens digit, and 2 is the ones digit.

Another way to think about this is to rewrite 432 as

4 x 102

+ 3 x 101

+ 2 x 100

Each digit is multiplied by the next power of ten. Numbers in other bases, such as base 16, are merely numbers where the base is not ten! For instance, we could interpret 432 as though it were in base 16 by evaluating it as

4 x 162

+ 3 x 161

+ 2 x 100

This would be the same as the number 1074 in base 10.

So to convert a number from a given base into base 10, all we need to do is treat each place as a power of the given base times the value of the digit in that place. Note that customarily for a given base, only digits from 0 to the base minus one are used. For instance, in decimal, we only use the digits 0 through 9. That’s because we don’t need any more digits to express every possible number. (But we do need at least that many; if we only had 8 digits, how would we ever express the value 9?)

Now, bases greater than 10 will require more than 10 possible digits. For intsance, the number 11 in base ten can be expressed in base 16 with only a single digit because the ones place in base 16 can range from 0 to 15. Since we only have 10 digits, the letters A through F are used to stand for the “digits” 10 through 15. So, for instance, the hexadecimal number B stands for the decimal number 11.

Bases less than ten will require fewer digits–for instance, binary, which works using powers of two, only needs two digits: one and zero. The binary number 1001, for instance, is the same as writing

1 * 23

1 * 22

1 * 21

1 * 20

which comes out to the decimal value 9.

Numbers written in octal use a base of 8 instead of 2 or 16. See if you can figure out what the number 20 written in octal would be in base ten.

Because octal, hexadecimal, and decimal numbers can often share the same digits, there needs to be some way of distinguishing between them. Traditionally, octal numbers are written with a leading 0; for instance, 020 is the same thing as the number 20 in base 8. Hexadecimal numbers are written with the prefix of “0x”. So 0x20 would be the number 20 in base 16; we’d interpret it the same as the decimal number 32.

Converting from decimal to octal or hexadecimal

It turns out that when you wish to convert from decimal to octal or hexadecimal, there is a very easy formula that you can use. I’ll give you the one for octal, and let you puzzle out the hexadecimal version (which may come quite naturally to some of you).

To convert from octal to hexadecimal, all you need to do is group the binary digits into pairs of three and convert each one into the corresponding octal number. For instance, given the binary number 010011110, you would group 011 and 110 together. 010 is 2, 011 is 3 and 110 is 6. So the octal number is 0236.

So why exactly does this work? Well, let’s take a look at what 011110 looks like:

0 * 28

1 * 27

0 * 26

0 * 25

+ 1 * 24

+ 1 * 23

+ 1 * 22

+ 1 * 21

+ 0 * 20

That’s actually the same as

0 * 22 * 26

+ 1 * 21 * 26

+ 0 * 20 * 26

+ 0 * 22 * 23

+ 1 * 21 * 23

+ 1 * 20 * 23

+ 1 * 22 * 20

+ 1 * 21 * 20

+ 0 * 20 * 20

Whoa! First, notice that the far right column is actually turning into powers of 8! 23 is 8, and 26 is 64! So this means for each group of three digits, we have the base increasing by a factor of 8. Moreover, look at the right hand column. It can sum up to at most 7 (since 20 + 21 + 22 = 1 + 2 + 4 and the binary digit just decides whether each power of two is included into the sum or not). That’s exactly the same as having eight digits, 0 through 7, and once we sum them all together, we multiply the sum by a power of eight. That’s just the same as making each group of three binary digits an octal digit!

0x900d – Regards

XSATRIA

I love electronics. Bring on the borg revolution!