Audio Stream with Raspberry / nix

Hi, Friend! (remembering OUIJA movie that 2 days ago I watched) hehe


with helping of Darkice and Ice-Cast we’re able to brodcast our mp3 to HTTP stream.

here’s the instruction how to set the darkice and icecast on rasp-pi board :

Download darkice source

First, add the Raspbian source repository if it isn’t already loaded. Add this line to /etc/apt/sources.list

deb-src wheezy main contrib non-free rpi

Update packages and install the darkice dependencies.

$ sudo apt-get update
$ sudo apt-get --no-install-recommends install build-essential devscripts autotools-dev fakeroot dpkg-dev debhelper autotools-dev dh-make quilt ccache libsamplerate0-dev libpulse-dev libaudio-dev lame libjack-jackd2-dev libasound2-dev libtwolame-dev libfaad-dev libflac-dev libmp4v2-dev libshout3-dev libmp3lame-dev

Grab the source package for darkice.

$ mkdir src; cd src/
$ apt-get source darkice

Modify the compilation options to match Raspbian.

$ cd darkice-1.0
$ vi debian/rules

debian/rules should look like this:

#!/usr/bin/make -f

dh $@

.PHONY: override_dh_auto_configure
ln -s /usr/share/misc/config.guess .
ln -s /usr/share/misc/config.sub .
dh_auto_configure — –prefix=/usr –sysconfdir=/usr/share/doc/darkice/examples –with-vorbis-prefix=/usr/lib/arm-linux-gnueabihf/ –with-jack-prefix=/usr/lib/arm-linux-gnueabihf/ –with-alsa-prefix=/usr/lib/arm-linux-gnueabihf/ –with-faac-prefix=/usr/lib/arm-linux-gnueabihf/ –with-aacplus-prefix=/usr/lib/arm-linux-gnueabihf/ –with-samplerate-prefix=/usr/lib/arm-linux-gnueabihf/ –with-lame-prefix=/usr/lib/arm-linux-gnueabihf/ CFLAGS=’-march=armv6 -mfpu=vfp -mfloat-abi=hard’


Beware, ‘make’ wants tabs instead of spaces. To be on the safe side, you can download this rules file instead.

Before you build the new .deb package, change the version to reflect MP3 support:

$ debchange -v 1.0-999~mp3+1

Build and install darkice

Now build and install your custom darkice package.

$ dpkg-buildpackage -rfakeroot -uc -b
$ sudo dpkg -i ../darkice_1.0-999~mp3+1_armhf.deb

Darkice is now installed. To configure it, copy the template config file to /etc.

$ sudo cp /usr/share/doc/darkice/examples/darkice.cfg /etc/

Here’s my sample config file:

# see the darkice.cfg man page for details

# this section describes general aspects of the live streaming session
duration = 0 # duration of encoding, in seconds. 0 means forever
bufferSecs = 5 # size of internal slip buffer, in seconds
reconnect = yes # reconnect to the server(s) if disconnected

# this section describes the audio input that will be streamed
device = plughw:1,0 # Alsa soundcard device for the audio input
sampleRate = 44100 # sample rate in Hz. try 11025, 22050 or 44100
bitsPerSample = 16 # bits per sample. try 16
channel = 1 # channels. 1 = mono, 2 = stereo

# this section describes a streaming connection to an IceCast2 server
# there may be up to 8 of these sections, named [icecast2-0] … [icecast2-7]
# these can be mixed with [icecast-x] and [shoutcast-x] sections
bitrateMode = vbr # variable bit rate
format = mp3 # format of the stream: mp3
quality = 1.0 # quality of the stream sent to the server
bitrate = 256
server = localhost # host name of the server
port = 8000 # port of the IceCast2 server, usually 8000
password = *SOURCE_PASS* # source password to the IceCast2 server
mountPoint = raspi # mount point of this stream on the IceCast2 server
name = RasPi # name of the stream
description = DarkIce on RasPi # description of the stream
url = http://localhost # URL related to the stream
genre = Baby # genre of the stream
public = no # advertise this stream?
localDumpFile = recording.mp3 # Record also to a file

Install icecast2 and begin monitoring

Now you’ll need to install icecast2 to stream the audio over the network.

$ sudo apt-get install icecast2

The installer will ask you for a few passwords, make sure you set the source password as the same one for darkice (*SOURCE_PASS* in the sample config above).

Now start icecast2 and darkice.

$ sudo service icecast2 start
$ sudo darkice
DarkIce 1.0 live audio streamer,
Copyright (c) 2000-2007, Tyrell Hungary,
Copyright (c) 2008-2010, Akos Maroy and Rafael Diniz
This is free software, and you are welcome to redistribute it
under the terms of The GNU General Public License version 3 or
any later version.

Using config file: /etc/darkice.cfg
Using ALSA DSP input device: plughw:1,0
Using POSIX real-time scheduling, priority 98

Darkice will run in the foreground (CTRL+C to exit).

Now open up a browser and navigate to http://{Raspberry Pi IP}:8000. Click on m3u and your audio player should play  monitor audio. It even works on my Nexus Phone.

just contact me for the info


Audio Stream with Raspberry / nix

One thought on “Audio Stream with Raspberry / nix

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s